Tech Tip: Honda Engine Won't Start? Check for Loose Alternator Bolts

Tech Tip: Honda Engine Won’t Start? Check for Loose Alternator Bolts

If the alternator bolts are loose, tighten them and try restarting the engine. If the engine still won't start, then check the ECM/PCM connector for battery voltage and ground. If you're reading battery voltage and ground at the connector, then replace the ECM/PCM.

Applies to: 2001-’04 Honda Civic

Got a 2001-’04 Civic in your shop with any or all of these symptoms?

• The engine cranks but it won’t start.

• The MIL comes on.

• The immobilizer indicator blinks while the ­engine cranks.

• The HDS can’t communicate with the ECM/PCM.

Check for loose alternator bolts. If these bolts are loose for any reason such as the alternator was R&R’ed, or an accessory A/C was installed on a DX model at the dealership, the alternator can overcharge and fry the ECM/PCM.

If the alternator bolts are loose, tighten them and try restarting the engine. If the engine still won’t start, then check the ECM/PCM connector for battery voltage and ground. If you’re reading battery voltage and ground at the connector, then replace the ECM/PCM. Keep in mind, though, any ECM/PCM damage that’s caused by loose alternator bolts from A/C installation or body repair isn’t covered under warranty.

Courtesy of Honda Service News via ALLDATA.

You May Also Like

Registration Open for ETI ToolTech 2024

The event will be held on April 22-24, 2024 in Newport Beach, CA, at the VEA Newport Beach Marriott.

The Equipment & Tool Institute's (ETI) Mission is to advance the vehicle service industry by providing technical data and open dialog between the manufacturers of transportation products, government regulators and the providers of tools, equipment, and service information. 

This mission is put into action at the annual ETI ToolTech event. This year, the event will be held on April 22-24, 2024 in Newport Beach, CA, at the VEA Newport Beach Marriott.

TS Toolbox Guide February 2024

Here’s a look at some of the core feature and modern frills to consider when it’s time to move into a new office.

toolbox guide illustartion
Embracing Cutting-Edge Solutions the Industry has to Offer

Embracing cutting-edge solutions is strategic and imperative for technicians navigating the constantly changing landscape of automotive maintenance and repair.

Nadine Battah
TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

Tire tread
Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Scan Tool

Other Posts

New Snap-on Limited Edition Speed Demon Roll Cab

Features include next-level organization, durability, security, mobility and exclusive Speed Demon emblem.

TEXA Releases IDC5 CAR 76.5.0 Update

IDC5 CAR 76.5.0 is characterized by over 2600 new possible selections for the major makes on the market worldwide.

ISN Expands Freedom Program for Mobile Tool Dealers

ISN’s Freedom Program is designed to provide experienced, successful mobile tool dealers with support to become an independent mobile dealer and expand their growth.

Snap-on Continues to Offer Free Weekly Product Training Sessions

The online training and question and answer sessions are free of charge.