Filters for Brakes: Hawaii Proves There is a Sucker Born Every Minute

Filters for Brakes: Hawaii Proves There is a Sucker Born Every Minute

New laws regulating the amount of copper present in brake pads are becoming reality. Most brake manufacturers are ready or getting ready for the California and Washington state mandates to kick in over the next 10 to 15 years. Other states, like New York, Rhode Island and Oregon, are working on their own proposals. Most of these regulations are written in a way so the public is not at risk and so they do not become an economic burden to the state, aftermarket manufacturers or the public. But, Hawaii has gone off the deep end with the help of an inventor.

New laws regulating the amount of copper present in brake pads are becoming reality. Most brake manufacturers are ready or getting ready for the California and Washington state mandates to kick in over the next 10 to 15 years. Other states, like New York, Rhode Island and Oregon, are working on their own proposals.
 
Most of these regulations are written in a way so the public is not at risk and so they do not become an economic burden to the state, aftermarket manufacturers or the public. But, Hawaii has gone off the deep end with the help of an inventor.
 
At first, I thought it was a joke, filters placed behind the wheel to remove brake dust and rubber using just the air blowing in the wheel wells. The filter looks like it is made of normal filter materials and mounted in a flat plastic cage. They make the claim that it can trap particles as small as 2.5 microns.   
 
The filter is designed to absorb the stuff blowing around in the wheel well. The filter mounts to the rear of the wheel well. The company behind the filters, StreetVac, calls the technology “virtual vacuuming” in an explanation of the product. The company claims filters should be replaced every oil change.
 
There are four real-world problems for theses filters. First, the wheel well can be a wet environment. One good rainstorm and the partials of brake dust and road debris would be washed away. Second, the filter would only catch a very small percentage of the brake dust. Third, some particles of brake dust are a lot smaller than the filter could catch. Fourth, even if every vehicle had four filters, the amount of copper and other heavy metal contaminates trapped would be very small compared to if they were not there in the first place.
 
Unfortunately this is not a joke or April Fool’s prank. This is a real invention that the inventors are trying to get state governments to mandate. Why? Because politicians rarely vote against something they do not understand or might save the environment.
 
StreetVac has been lobbying Hawaii’s state government to get the Revised Statues for Motor Vehicles amended to include a provision to at least get the state government to test the filters or maybe even require them for all vehicle fleets. Unfortunately, they found a politician who would listen. Here is a sample from Hawaii’s SB 2342 that is currently tabled for further investigation:
A renewal registration shall not be issued to a registered owner or lessee unless every fleet vehicle owned or leased by that owner or lessee is equipped with aftermarket equipment certified under section 286 to directly capture and remove from the environment re-entrained particles and tire and brake wear emissions from all wheels.”
 
 (1)  Require each state agency to purchase, install and maintain aftermarket equipment certified by the director of transportation to directly capture and remove from the environment re-entrained particles and tire and brake wear emissions from all wheels of state agency motor vehicles.
(2)  Extend to 24 months the vehicle inspection period for vehicles that are installed with aftermarket equipment certified by the director of transportation to directly capture and remove from the environment re-entrained particles and tire and brake wear emissions.
(3)  Require the director of transportation to certify aftermarket equipment to directly capture and remove from the environment re-entrained particles and tire and brake wear emissions. 
 
In a nut shell, StreetVac convinced a Hawaiian politician and author of the amendments that the filters are the best thing since sliced bread. But, it looks like common sense is prevailing. 
 
What is even scarier is that they claim the used filters can be burned to generate electrical power. There are two problems with this scenario.
 
First, when these filters are burned, they would give off high levels of toxic substances. Second, it is projected that Hawaii will run out of landfill in 30 years even with a three boiler incinerator power generation plant going full bore. Also, Hawaii ships a lot of its garbage 2,600 miles to be disposed of on the mainland. 
 
Looking at the grand scheme of things, not having the filters in the first place would have a greater positive effect on the environment as a whole. 
 

You May Also Like

Embracing Cutting-Edge Solutions the Industry has to Offer

Embracing cutting-edge solutions is strategic and imperative for technicians navigating the constantly changing landscape of automotive maintenance and repair.

Nadine Battah

Remember last month how I said 2024 was your year to be the technicians you always wanted to be? Remaining stagnant as a technician is simply not an option anymore if you want to be successful in the automotive industry. You must proactively seek out opportunities to embrace new tools, techniques and solutions that promise to enhance efficiency, accuracy and customer satisfaction.Embracing what’s new is strategic and imperative for technicians navigating the constantly changing landscape of automotive maintenance and repair.One of the top reasons I can give you for embracing new technology is the potential for improved diagnostic accuracy and efficiency. With the arrival of advanced diagnostic tools, like the Bosch ADS 625X, the Autel IA900, or the Hunter ADASLink, technicians can pinpoint issues with precision, reducing guesswork and minimizing the risk of a comeback. Whether it’s sophisticated tools or cutting-edge software solutions, the ability to leverage these new tools should empower you to deliver next-level service and drive positive repair experiences for your customers.Another thing to keep in mind is that embracing new technology and equipment opens doors to expanded service offerings. From state-of-the-art lifts and alignment systems, to specialized tools designed for specific makes and models, investing in the latest equipment enables you and other technicians to tackle a larger range of repairs and maintenance with confidence and precision. As the technology in cars continue to evolve, so too must the tools and equipment that technicians rely on to get the job done.Embracing new technology and equipment can also lead to improved productivity in the shop. By leveraging high-quality products that are specifically designed for today’s vehicles, you can streamline workflow, minimize downtime and deliver exceptional results for your customers.At TechShop, we understand the importance of embracing new technology, equipment and products in the automotive repair industry. That’s why we’re excited to announce the debut of our all-new “Tool Time” video podcast series, where guests from brands like Ingersoll Rand, Clore Automotive, SATA Spray Equipment and many more will sit down and join Eric Garbe and myself to discuss education and training on the latest products our industry has to offer.Join us as we embrace the future of automotive tool supply and equipment advancements together. And, be sure to subscribe to the TechShop newsletter to stay tuned!

TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

Tire tread
Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Scan Tool
2024 Is Your Year to Be the Technician You Always Wanted to Be

As we enter 2024, strategic career planning is essential for success in the automotive repair industry.

happy new year 2024
Impact Wrench Technology

Interchangeable anvils are a feature on some new impacts.

Other Posts

Identity Crisis and the Rise of the Specialist

Is it time to move on from ‘technician’ and become ‘specialists’ in the shop?

Tools in the Eye of the Beholder

We’re here to help you see all the tools, so you can invest wisely.

Multimeter Accuracy: How Important Is It?

Multimeter accuracy is critical for EV diagnostics.

multimeter
More Than A Scan Tool

Scan tools serve as indispensable diagnostic hubs, offering access to a wealth of resources, from OEM technical bulletins to community-documented repairs.

scan tool