Tech Tip: Dodge/Jeep Engine Misfire at Idle

Tech Tip: Dodge/Jeep Engine Misfire at Idle

This bulletin applies to vehicles equipped with a 3.7L engine in which the customer may experience occasional engine misfire at idle. The malfunction indicator lamp may illuminate for single or multiple cylinder misfire.

Models: 2005-’06 (KJ) Liberty/Cherokee (International Markets) and (ND) Dakota

Note: This bulletin applies to vehicles equipped with a 3.7L engine (sales code EKG).
The customer may experience occasional engine misfire at idle (rough idle). The malfunction indicator lamp may illuminate for single or multiple cylinder misfire.

Diagnosis
1. Place the vehicle in park or neutral.

2. Using a StarSCAN or DRBIII, monitor which cylinder is misfiring. Cylinder #3 is the most likely cylinder to have idle misfire. A cylinder on the opposite bank very rarely may exhibit a misfire at idle.
Note: When monitoring which cylinder is misfiring, counts should be above 10 per minute.

3. Record misfire counts for 1 minute.

4. Rev the engine up to 3,500 to 4,000 rpm and release; do not hold the engine at the elevated rpm, let it come back down to idle.

5. Monitor the cylinder misfire count for one minute. If the misfire rate does not reduce to less than five per minute then repeat Step 4 and re-monitor up to 10 times.

6. If the misfire rate does reduce to less than five per minute, perform the Repair Procedure. If the misfire rate does not reduce to less than five per minute after repeating Step 4 10 times, this bulletin does not apply and further diagnosis is required.

Repair Procedure
1. Replace all intake valves and valve locks of the cylinder head that has the misfiring cylinder. Both cylinder heads must have the locks replaced.

2. Repeat Steps 1 through 5 of the Diagnosis, monitoring all cylinders for misfire after the repair work is completed.

3. A cylinder on the opposite bank very rarely may exhibit a misfire at idle. If the opposite bank now has a misfire, then the new keepers have allowed a non-rotating valve with uneven wear to rotate and induce a misfire. In this case the intake valves on this head must now be replaced.

Qty.     Part No.            Description
12        53022277AA    Valve Lock
AR 6    53020747AB    Intake Valve
AR 2    53020989         Head Gasket
AR 1    53013932AB    Exhaust Manifold Gasket (Right)
AR 1    53013933AB    Exhaust Manifold Gasket (Left)

Courtesy of ALLDATA.

You May Also Like

Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Scan Tool

If there’s a truth that extends across all computerized devices, it’s that we likely utilize only a fraction of the things they have the ability to do. Mobile phones are a great example. How many people do you know who only use them for calls, voicemail and text messages? We all know they do so much more.The scan tools we use every day fall into the same category. Are you maximizing yours to their full potential? Don’t let them be just an expensive code reader. That may be easier said than done, because it takes a lot of time to understand both the scan tool and how well it interacts with the vehicles you’re working on, but there are a few factors that can help you dive a little deeper into the functions at your fingertips.

Brake Lathe Basics

Resurfacing drums and rotors is a machining process with its own specific guidelines.

Refrigerant Oil Has to Be Right

Oil type is just as important as oil capacity.

Three bottles of refrigerant oil
Top 5 Tools: Steve Coffell, Auto World, Hazelwood, MO

Steve Coffell, a technician at Auto World in Hazelwood, MO, says his Top 5 Favorite Tools are: Related Articles – Lisle Low Profile Fuel Line Disconnect – Dent Fix Soft-Shock Mallet DF-SM76 Reduces Damage – New ProMAXX Diesel Fuel Injector Seal Puller/Saver ProKits   OTC Genisys Touch – Quick scan, bidirectional control Snap-on VANTAGE Pro

Wheel Bearing Adjustment Tools & Equipment

A wheel bearing that’s out of adjustment can reduce bearing life and can affect more than just the bearing. It’s important to adjust the wheel bearing endplay to the proper specifications. If the bearing set is adjusted too loose or too tight, it can cause the bearing to fail prematurely. There are a few types of assemblies, so using correct procedures and tools will ensure a comeback-free wheel bearing installation.

Other Posts

TEXA Releases IDC5 CAR 76.5.0 Update

IDC5 CAR 76.5.0 is characterized by over 2600 new possible selections for the major makes on the market worldwide.

2024 Is Your Year to Be the Technician You Always Wanted to Be

As we enter 2024, strategic career planning is essential for success in the automotive repair industry.

happy new year 2024
Software Focus: Efficient Diagnostics

Discover how to quickly retrieve codes, access exclusive repair information, and develop a strategic plan for optimal diagnostic results. This video is sponsored by Bosch.

Why ECU Reflashing Needs Certain Power Levels

A reflash power supply is not designed to jumpstart the vehicle.