Volkswagen Tech Tip: Solving Suspension Creaking Noise

Volkswagen Tech Tip: Solving Suspension Creaking Noise

Select Volkswagen vehicles may exhibit a creaking noise originating in the front suspension while entering steep driveways or over large bumps. The source of this noise could be the forward inner control arm bushing. To confirm if this is the issue, raise the vehicle and remove the wheel on the suspected side.

Vehicles: 
2006-09 Volkswagen Passat
2005-09 Volkswagen Jetta A5, 
2009 Jetta SportWagen 
2006-09 Volkswagen Rabbit, GTI, R32 
2007-09 Volkswagen Eos 
2009 Volkswagen CC 
Repair Procedure: Vehicles listed above may exhibit a creaking noise originating in the front suspension while entering steep driveways or over large bumps. The source of this noise could be the forward inner control arm bushing. 
 
To confirm if this is the issue, raise the vehicle and remove the wheel on the suspected side. Disconnect the lower control arm at the ball joint and move the arm up and down, checking for noise at the forward bushing. If the noise is found, remove the control arm and replace the bushing with Raybestos Chassis part number 565-1362. 
 

You May Also Like

Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Scan Tool

If there’s a truth that extends across all computerized devices, it’s that we likely utilize only a fraction of the things they have the ability to do. Mobile phones are a great example. How many people do you know who only use them for calls, voicemail and text messages? We all know they do so much more.The scan tools we use every day fall into the same category. Are you maximizing yours to their full potential? Don’t let them be just an expensive code reader. That may be easier said than done, because it takes a lot of time to understand both the scan tool and how well it interacts with the vehicles you’re working on, but there are a few factors that can help you dive a little deeper into the functions at your fingertips.

2024 Is Your Year to Be the Technician You Always Wanted to Be

As we enter 2024, strategic career planning is essential for success in the automotive repair industry.

happy new year 2024
Impact Wrench Technology

Interchangeable anvils are a feature on some new impacts.

Tools in the Eye of the Beholder

We’re here to help you see all the tools, so you can invest wisely.

Multimeter Accuracy: How Important Is It?

Multimeter accuracy is critical for EV diagnostics.

multimeter

Other Posts

More Than A Scan Tool

Scan tools serve as indispensable diagnostic hubs, offering access to a wealth of resources, from OEM technical bulletins to community-documented repairs.

scan tool
Battling Stress and Burnout

Here are some quick tips for managing stress and avoiding burnout in the fast-paced automotive repair industry.

Nadine Battah
EV Acronyms and Terminology

Electric vehicles (EVs) are here to stay and there’s a lot to learn.

EV
The Value of Honesty in Auto Repairs

Discover how a simple act of returning found money led to a radio story, highlighting the significance of honesty.