10 Reasons Why You Don't Sell More Loaded Shocks And Struts

10 Reasons Why You Don’t Sell More Loaded Shocks And Struts

Do you only look at the shocks and struts when the driver complains of a noise or when the vehicle can't be aligned? This might be just one of several reasons you aren't selling more loaded shocks and struts despite a vehicle's need for them. Here are 10 tips to help you better identify the need for shocks and struts and for effectively educating your customers to make the sale.
1. You don’t inspect shocks and struts.
Are you just looking for catastrophic damage? Do you only look at the shocks and struts when the driver complains of a noise or when the vehicle can’t be aligned?
 
The first step in selling ride control is the inspection process. A visual inspection of the shocks and struts can tell you a lot about the state of the ride control units. This is a chance to make sure the vehicle is road-worthy before you put your own life at risk. 
 
Look for signs that the units might be leaking oil, such as accumulation of road grime or oil inside boots and dust shields. Keep an eye out for “witness marks” that indicate the suspension might have bottomed out recently. Make sure all bushings and hardware for the ride control units are still on the vehicle.
 
Walk around the vehicle and perform the tried-and-true “knee-on-the-bumper” test. This test is not conclusive on its own, but it is a chance to quickly look for abnormal behavior. If you notice binding or looseness, or if the vehicle does not return to the original ride height, there could be a problem with the ride control components.

2. Your test drives need work.
When you don’t perform a test drive, you are not using your most powerful ride control tool: perspective. A technician or service writer behind the wheel brings fresh senses to the vehicle that haven’t been dulled by thousands of miles.
 
Before the test drive, you should have a clear list of symptoms and related conditions the customer might be experiencing. On the test drive, you should have a clear and methodical plan that inspects for ride control component replacement and other unperformed repairs.
 
A good test driver will be able to observe conditions or problems with the vehicle that have developed so slowly the owner is unaware of them — like degraded shocks and struts. One of the keys to becoming a good test driver is to find a driving “loop” or route that has a variety of road conditions. A predetermined loop adds a consistency that helps you spot small problems.
 
For suspension road tests, your test loop should consist of sections: a flat and straight section; an area to test braking and acceleration; an area with a dip or bump; and an area that offers both left and right turns. 
 
Use a parking lot or rarely used section of road for the braking and acceleration section of the test. This test is used to detect brake pulls, torque steer and worn or loose suspension or steering components. Check for excessive nose-diving during braking. This is not normal and may be caused by worn springs or other ride control components. 
 
Excessive suspension bouncing may be the result of weak shocks; bottoming out of the suspension may be the result of weak springs. Check for steering difficulties that may be the result of mechanical binding or interference.
 
Any excessive body sway could indicate worn springs, shocks or stabilizer assemblies. Listen for any excessive tire squealing during turns. This can be caused by incorrect alignment settings or a turning angle out of specifications.
 
Developing a methodical and consistent test drive loop and procedure can improve your chances of coming back from a test drive with an understanding of the problem the owner is experiencing. Also, a plan and a loop can eliminate distractions that could lead to an accident.
3. You don’t use an inspection form.
The technician should be supplied with a checklist to make notes. Some ride control manufacturers can provide you with printed forms. These forms help the salesperson be more confident in the selling process.
 
A complete inspection lays the groundwork for excellent customer communications and increases the possibility of a sale. The results of the inspection can help personalize the sales pitch to the individual customer.
4. You chicken out on the recommendation for loaded struts.
Even if the customer does not buy today, the inspection form, sales approach and pitch will likely stick with the consumer longer than the generic “recommend loaded struts.” They are more likely to return, which means your efforts will not be in vain.
5. Your car is in need of a ride control tuneup.
To increase your confidence in selling loaded struts, have new units installed on your own vehicle. You will be amazed at the difference if your vehicle has more than 50,000 miles. Also, you will sell more units because you have a better view of the perceived value.
 
Some ride control manufacturers help you by holding local clinics where you can drive vehicles in different states of ride control degradation. These events are typically held in parking lots on specially designed courses that magnify certain vehicle dynamics at low speeds. These events can energize a shop to sell ride control products more effectively.

6. You are afraid of losing a tire sale.
Tires are not cheap. When you get close to the sale, are you afraid to recommend new shocks and struts because the customer might bolt for the door when they hear the price for new loaded struts? You shouldn’t be. New shocks and struts protect the investment in their tires. 
 
By the time a vehicle is ready for its second or third set of tires, it is time for new ride control components. This is based on mileage and the expense and premature wear that degraded ride control can have on new tires. 
 
7. You use your squinted eye and thumb to check ride height.
OEMs include ride height specifications and measurement procedures in their service information for many reasons. The main reason is that springs wear out. The ride height also can be used as a diagnostic tool to determine the condition of the suspension. This involves more than your thumb and one closed eye. 
 
Research the factory methods and specs to properly measure ride height. Neglecting to do this can affect the life of the shocks and struts and all angles of alignment. Among other considerations, engineers design the chassis and ride control components so that the ride height places the suspension at a particular point midway in its travel. Midway is not always the center, however. 
 
Most springs are made of metal. As a simple example, take a coat hanger or welding rod and bend it in the same area several times. It will eventually break from metal fatigue. 
8. You start at the bottom and try to work your way up.
Do you play it safe? Do you start with the least expensive option and try to work your way up? When selling ride control components, it is an effective sales tactic to start with premium products first rather than the economy or less-expensive option. This gives you a little room to provide the customer options that meet their budget and vehicle life expectancy.
 
Chances are that the customer wants the best. Starting the estimate with the least expensive alternative can lower your profit. Sure, quoting the lowest price might get some customers in the door, but it may leave some customers wanting more.
9. You hate hearing “no.”
It has been estimated by one shop that 50 percent of its ride control sales happen on the second visit. This means a large percentage of its first time sales pitches for ride control were shot down on the first try. 
 
Don’t give up. 
10. There is no incentive to sell loaded struts and shocks.
First, try increasing at least the number of ride control component inspections and recommendations to customers. Next, set a sales goal.

You May Also Like

Embracing Cutting-Edge Solutions the Industry has to Offer

Embracing cutting-edge solutions is strategic and imperative for technicians navigating the constantly changing landscape of automotive maintenance and repair.

Nadine Battah

Remember last month how I said 2024 was your year to be the technicians you always wanted to be? Remaining stagnant as a technician is simply not an option anymore if you want to be successful in the automotive industry. You must proactively seek out opportunities to embrace new tools, techniques and solutions that promise to enhance efficiency, accuracy and customer satisfaction.Embracing what’s new is strategic and imperative for technicians navigating the constantly changing landscape of automotive maintenance and repair.One of the top reasons I can give you for embracing new technology is the potential for improved diagnostic accuracy and efficiency. With the arrival of advanced diagnostic tools, like the Bosch ADS 625X, the Autel IA900, or the Hunter ADASLink, technicians can pinpoint issues with precision, reducing guesswork and minimizing the risk of a comeback. Whether it’s sophisticated tools or cutting-edge software solutions, the ability to leverage these new tools should empower you to deliver next-level service and drive positive repair experiences for your customers.Another thing to keep in mind is that embracing new technology and equipment opens doors to expanded service offerings. From state-of-the-art lifts and alignment systems, to specialized tools designed for specific makes and models, investing in the latest equipment enables you and other technicians to tackle a larger range of repairs and maintenance with confidence and precision. As the technology in cars continue to evolve, so too must the tools and equipment that technicians rely on to get the job done.Embracing new technology and equipment can also lead to improved productivity in the shop. By leveraging high-quality products that are specifically designed for today’s vehicles, you can streamline workflow, minimize downtime and deliver exceptional results for your customers.At TechShop, we understand the importance of embracing new technology, equipment and products in the automotive repair industry. That’s why we’re excited to announce the debut of our all-new “Tool Time” video podcast series, where guests from brands like Ingersoll Rand, Clore Automotive, SATA Spray Equipment and many more will sit down and join Eric Garbe and myself to discuss education and training on the latest products our industry has to offer.Join us as we embrace the future of automotive tool supply and equipment advancements together. And, be sure to subscribe to the TechShop newsletter to stay tuned!

TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

Tire tread
Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Scan Tool
2024 Is Your Year to Be the Technician You Always Wanted to Be

As we enter 2024, strategic career planning is essential for success in the automotive repair industry.

happy new year 2024
Impact Wrench Technology

Interchangeable anvils are a feature on some new impacts.

Other Posts
Tools in the Eye of the Beholder

We’re here to help you see all the tools, so you can invest wisely.

Multimeter Accuracy: How Important Is It?

Multimeter accuracy is critical for EV diagnostics.

multimeter
More Than A Scan Tool

Scan tools serve as indispensable diagnostic hubs, offering access to a wealth of resources, from OEM technical bulletins to community-documented repairs.

scan tool
Battling Stress and Burnout

Here are some quick tips for managing stress and avoiding burnout in the fast-paced automotive repair industry.

Nadine Battah