Tech Shop - Buyer's Guide

BendPak, Inc.

Phone: 805-933-9970Fax: 805-933-9160

http://www.bendpak.com

1645 E. Lemonwood Drive
Santa Paula CA 93060

LITESTIX Work Light by BendPak Now Lasts Longer

Now powered by a higher-capacity rechargeable battery, the LITESTIX by BendPak portable LED work light provides up to seven hours of continuous use on one charge. The new LITESTIX LS36SMDX model is...

BendPak Full-Rise Scissor Lift Delivers Two-Post Performance

The new BendPak SP-7XE Series of full-rise scissor lifts provides the performance and undercarriage access of traditional two-post lifts in a more compact, space-saving package. Floor- and ...

BendPak to Debut Eight-Armed Car Lift Concept at NADA

BendPak announced its patent-pending Octa-Flex™ concept, which it's calling "a radical new two-post lift design," that features two sets of arms: triple-telescoping swing arms, plus all-n...

Ranger Introduces TruSensor Universal TPMS Diagnostic Kit

Ranger Division of BendPak, a leader in wheel service equipment, introduces its TruSensor universal TPMS solution for diagnosing and programming tire pressure monitoring systems on import a...

New BendPak Lifts Stop the ‘Parking Shuffle’

BendPak announced its new BendPak PL-12000DP and PL-12000DPS double-wide parking lifts securely store four vehicles in two parking spots without all the time-consuming vehicle shuffling nec...

New BendPak Mobi-EVSTM EV & Powertrain Lifting Systems

BendPak has improved, expanded, and branded its EV battery scissor lift table lineup to make servicing both electric and internal combustion vehicles more efficient than ever. The new Mobi-EVS EV b...

BendPak Two-Post Lift for Electric Vehicles and Beyond

BendPak introduces its AP Series – the next generation of two-post lifts with patent-pending features designed to make lifting internal combustion and electric cars, trucks and vans safer...

BendPak Introduces New Ergochair Creeper/Work Seat

BendPak has introduced the Ergochair, a new brand dedicated to helping technicians work more comfortably. With Ergochair, BendPak has reinvented the traditional mechanic’s creeper to create a pa...

Dannmar Introduces D4-12A Alignment Lift

The new D4-12A alignment lift from Dannmar (a BendPak brand) can be used to perform two- or four-wheel alignments and general service work on cars, SUVs and light trucks weighing up to 12,000 lbs. ...

Beat the Heat with Cool Boss Air Coolers

Building on the success of its original portable evaporative air cooler, Cool Boss, a division of BendPak, Inc. is rolling out an all-new lineup of seven energy-efficient models designed to...

Lift Most EVs with New QuickJack 6000ELX Portable Car Lift

The new QuickJack 6000ELX portable car lift offers a compact and affordable solution for lifting electric vehicles (EVs) for maintenance, service and detailing at a shop, at home or on the ...

BendPak Helps Shops Get Equipped to Service EVs

Now that traditional automakers have entered the electric space, dealers around the country have to prepare to service and maintain electric cars, trucks and vans. BendPak is ready to help with two n...

See More and Do More with LITESTIX by BendPak

Even in shops and garages with excellent overhead lighting, visibility within engine compartments, vehicle interiors, or under a lift can be challenging. Portable w...

BendPak Makes Servicing EV Batteries Safer, More Efficient

BendPak’s patent-pending new SL24EVT EV battery pack and powertrain lifting system helps technicians safely and efficiently remove, service and install heavy battery packs from a wide ran...

BendPak Introduces Patriot Series American-Made Air Compressors

BendPak introduces a full line of air compressors made in the U.S.A. The new Patriot Series offers efficient, industrial-strength air compressors for any shop or home garage. “While the BendPak ...

New BendPak Two-Post Lifts Are Designed for Tall Techs

Technician complaint No. 13: I’m too tall to work under this lift. Technician complaint No. 26: It’s really hard to reach the OEM-recommended&nbs...

BendPak Redesigns MaxJax Portable 2-Post Lift

After six months of design, engineering and production improvements, BendPak Inc. is rolling out the new MaxJax M6K portable two-post lift. “The patented MaxJax lift des...

BendPak's Portable Evaporative Air Cooler Keeps Shops Cool

The new Cool Boss portable evaporative air cooler from BendPak provides a low-cost, environmentally friendly way to keep shops cool and improve efficiency during the hottest summer months. The Co...

New Ranger R80EX Tire Changer Helps Busy Tire Shops

Low-profile tires. Run flats. Mud tires. Off-road tires. High-volume tire shops have to be prepared to handle any type of wheel that rolls into the shop. That means having a tire-changer that’s rug...

Ranger Cabinets Degrease Vehicle Components and Resist Rust

Ranger’s new RS-500DS and RS-750DS stainless-steel spray wash cabinets are specifically designed to resist rust while washing away the grime from a full range of vehicle parts, from nuts and bolts ...

Bend-Paks $199 Two-Post Lift

Small In Scale, But Not In Awesomeness Your dream of bringing a full-sized BendPak car lift to your desktop, shop or shelf has finally arrived. Introducing the world’s first fully-functio...

BendPak R-134A Recovery, Recycling and Recharging Machine

There's nothing easier than programming your A/C settings and walking away to let the machine do its job. The same intuitive thinking that Ranger has brought to more shops worldwide than arguably...

BendPak 12,000-lb. Capacity 2-Post Lift

BendPak's XPR-12CL-LTA two-post lift gives you the ability to reach lift points on long wheelbase commercial trucks with its super-long 72-in. maximum arm reach. The three-stage telescoping lift...

BendPak to Showcase New Lift Technology at SEMA

BendPak will attend SEMA for four full days of car enthusiast heaven in Las Vegas. BendPak's low-ceiling GrandPrix lift will be on full display, as well as QuickJack and the Autostacker parking lift. ...

Maximum Alignment Convenience with BendPak’s HDS-Series Alignment Lifts

BendPak’s HDS-Series alignment lifts are engineered to meet the strenuous demands of even the toughest professional lifting jobs, says the company. The HDS-14LSX alignment system features fro...

BendPak Wins Bid to Supply Automotive Service Equipment to Government

BendPak Inc. recently won a contracted bid to provide municipalities and government buyers with lifts, wheel balancers, tire changers and brake lathes. The bid was awarded through the National ...

Ranger Wheel Balancer Features Faster Speeds While Taking Up Less Space

The DST30P is a cost-effective hybrid unit that offers the most precise readings you’ll ever generate from a wheel balancer, says the company. The DST30P handles wheels up to a 30” diameter...

BendPak Enhances Two-Post Car Lift Line

BendPak recently unveiled an entirely new series of two-post lifts that feature two-stage telescoping screw pads. The recent total model overhaul includes other design enhancements that focus on str...

BendPak-Ranger Introduces 3D Wheel Alignment System

Ranger Products recently introduced its new Target 3DPro 3D Imaging Wheel Alignment System for domestic and import cars and trucks. Lightweight impact-resistant wheel targets and high-resolution towe...

BendPak's Powerful Ranger Oil Filter Crusher Goes Green To Save Green

In just 20 seconds, Ranger Products’ high-powered RP-20FC Oil Filter Crusher applies 10 tons of pure, air-operated pressure to just about any used oil filter, easily reducing it to 25% of its origin...

Ranger Introduces New Automatic Leverless Tire Changer

Ranger Products, a division of BendPak Inc., is bringing another new tire changer to market. Its latest R80DTXF tire changer features an automatic bead lifter, variable speed turntable and bilateral b...

Ranger Introduces New Automatic Leverless Tire Changer

Ranger Products, a division of BendPak Inc., is bringing another new tire changer to market. Its latest R80DTXF tire changer features an automatic bead lifter, variable-speed turntable and bilateral b...

Ranger Introduces New Multi-Speed Tire Changer

Ranger Products, a division of BendPak Inc., is bringing another new tire changer to market. The company’s new R980ATF is a variable-speed model that performs masterfully on a wide variety of wh...

BendPak's New Low-Rise Lift Picks Up Where Others Leave Off

BendPak recently unveiled its new LR-5T — a 10,000-lb. capacity low-rise lift that accommodates passenger cars and trucks thanks to a newly designed lift platform, specialty adapters, wider drive-...

The QuickJack By Ranger Is the Ultimate Motorsports Jack System

Ranger Products, a division of BendPak, recently unveiled its new QuickJack portable jack system that makes vehicle maintenance — on the track and off — convenient and lightning fast. The 3,500-lb...

BendPak Goes All-In on 2023 SEMA Show with Four Booths

Equipment manufacturer BendPak, Inc., is doubling down on its 2023 SEMA Show investment, bringing new car lifts, evaporative coolers, EV lifts, boat lifts, wheel service equipment and more to four ...

BendPak Industrial Complex Under Development in Alabama

Diversification is paying dividends for BendPak, Inc. Driven by exponential business growth from new products and markets, the global garage equipment manufacturer is developing a huge ligh...

5 Reasons Your Shop Needs a Wheel Balancer

Wheel balancers are an essential tool for shops of all sizes. They quickly pay for themselves with new business and help you keep your customer satisfaction scores high. Here are the top five reas...

Help Your Team Keep Their Cool This Summer

Shop Tips brought to you by BendPak As the global climate changes, many parts of the country are experiencing longer and more intense heat waves. Areas where working outside or in an open service ...

Dannmar Unveils Upgraded Line of Lifts, Service Equipment

BendPak Inc. has completed its overhaul of the Dannmar brand and is rolling out a completely updated and expanded line of professional-grade car lifts, tire changers, wheel b...

Dannmar Unveils Upgraded Line of Lifts, Service Equipment

BendPak Inc. has completed its overhaul of the Dannmar brand and is rolling out a completely updated and expanded line of professional-grade car lifts, tire changers, wh...

Tech Tip: Check the Label Before Replacing A/C Refrigerant

This Shop Tip is brought to you by BendPak Federal, state and local regulations govern proper procedures for recovering, recharging and recycling R-134a motor vehicle air conditioning (A/C) refrig...

Keep Your Floor Jacks from Getting Jacked Up

Most well-made floor jacks will have a long service life in the shop if they are properly maintained. Like all equipment, floor jacks should be inspected regularly for damage and kept clean. The o...

Make Sure Your Transmission Jack Isn’t Out of Whack

Installing a new transmission or removing the old one can be a challenge without a properly working transmission jack. These powerful, multitask lifting systems are essential in most auto service dep...

BendPak Expands Economic Relief Program, Offers Black Friday Deals

BendPak is offering unprecedented Black Friday deals on its BendPak, QuickJack and MaxJax brand car lifts plus Ranger brake lathes, tire changers and wheel balancers Nov. 26 throu...

10 Tips for Daily Brake Lathe Maintenance

Like any equipment, your brake lathes need regular care and maintenance to operate at peak efficiency. Keep your brake lathe running smoothly by following these 10 daily tips. Important:&nbs...

Troubleshooting Your 2-Post Lift

Your lift is critical to the operation and profitability of your business. If it stops working correctly, it’s costing you money. Let’s take a look at how to troubleshoot some common issues and g...

How Often Is Lift Maintenance Needed?

Even the most rugged, low-maintenance lifts need attention from time-to-time. Give your lift a once over every day before you use it, checking the safety devices, operating controls, lift arms and...

BendPak Expands on Both Coasts to Facilitate Booming Lift, Garage Equipment Business

Less than six months after opening a 100,000-square-foot distribution center near Mobile, AL, to better serve customers on the East Coast, BendPak, a global leader in car lifts and automotive se...

Be Your Own Cable Guy

This Shop Tip is brought to you by BendPak When was the last time you checked your lift’s cables? If you answered “today,” good for you! Cables are one of the things you should check before ...

BendPak Expands Brand Portfolio with Acquistion

BendPak Holdings LLC, a wholly owned subsidiary of BendPak, Inc., has acquired certain assets, including related intellectual property rights, from Garage Equipment Supply, Inc. and its related intel...

New BendPak Distribution Center Speeds Delivery to Eastern U.S.

BendPak is opening a new 100,000-sq.-ft. distribution center near Mobile, AL, to better serve customers in the eastern United States. The administrative and shipping complex, which is expected to be ...

BendPak Set to Begin Construction on New Facility Early 2018

BendPak Inc. is set to expand for the second year in a row with a 50,000+ sq. ft. facility. The move, coming on the heels of a massive expansion just months prior, marks a new chapter fo...

BendPak Opens New 70,000-sq.-ft. Warehouse

BendPak Inc. has added yet another large-scale expansion to its complex. After nearly seven months of construction, the completed 70,000 sq. ft. shipping and receiving facility, which sits jus...

Blue No More, BendPak Goes Gray

BendPak is switching the color of its lifts from its traditional blue to gunmetal gray. According to the company, “People know us well enough that we don’t need to announce our presence eve...

Bendpak Breaks Ground On New Warehouse and Shipping Complex

BendPak, Inc. announced the recent groundbreaking to celebrate beginning construction of a 67,000 square-foot multipurpose warehouse and shipping center located on 3.7 acres of land in Santa Paula, ...

Bartec USA

Phone: 855-877-9732

Contact: Scot Hollowayhttp://bartecusa.com

44231 Phoenix Drive
Sterling Heights MI 48314

Bartec USA Announces Latest TPMS Tool Update

Bartec USA announces the release of their latest TPMS tool software update. According to Bartec’s Product Manager Mathew Hitchcock, this update adds significant coverage for the Rite-Sensor, adds n...

Bartec USA Announces New TPMS Tool

Bartec USA announce another new TPMS tool innovation, the TechRITEPro. Engineered from the “ground up,” this brand new TPMS tool from Bartec was designed to offer technicians of all levels, high ...

Bartec USA Announces Second 2020 Software Update

Bartec USA, a provider of TPMS Diagnostic tools and solutions, announces the release of their latest TPMS tool software update. According to Bartec’s Director of Sales Ed Jones, “Software update ...

Bartec Offers Programmable TPMS Sensor

RITE-SENSOR (P/N RS-1000) is Bartec’s newest programmable TPMS replacement sensor. A single part, multi-frequency solution, RITE-SENSOR covers more than 97% of vehicles on the road and comes with t...

RITE-SENSOR Launch in Full Swing

RITE-SENSOR is Bartec’s programmable, single part, multi-frequency, replacement TPMS sensor. According to Bartec CEO Scot Holloway, “Not only does RITE-SENSOR have great coverage, it was desi...

Bartec USA Announces New TPMS Sensor

Bartec USA announces their latest product innovation, the RITE-SENSOR. RITE-SENSOR is Bartec’s programmable, single part, multi-frequency replacement TPMS Sensor. According to Bartec CEO Sco...

Bartec USA Announces Latest TPMS Software Update

Bartec USA announced the release of their latest TPMS tool software update. Software update 58 is now available for download for your respective Bartec TPMS Tool. “Software update 58 will re...

Bartec Tech200Pro – Where Tire Inspection and Point of Sale Meet

The Bartec Tech200Pro is designed to work with your existing point of sale system or Bartec’s Service Center System, making it an easy, fast and accurate way to inform customers ...

Bartec USA's TPMS Desktop 4.0 Features Remote Tool Setup

Bartec USA announces its latest update to the TPMS Desktop, version 4.0, which includes the brand-new feature Remote Tool Setup. Using the newly released Tech200Pro Tire inspection tool, the front...

Latest TPMS Software Update from Bartec USA

Bartec USA announces the release of its latest TPMS tool software update. Available to current subscribers at tools.bartecusa.com, Release 56 can now be downloaded to your respective Bartec TPMS to...

Revive Your GDI or Turbo Engine with Bartec's Cleaner

Bartec USA announces a new solution to carbon and soot buildup in GDI and turbo diesel engines. Revive Turbo and Engine Cleaner is a non-flammable, non-toxic, water-based solution that is applied th...

Bartec Launches New Quick Service Tool

According to Scot Holloway, Bartec USA CEO, “The Bartec Group is growing organically as well as through acquisition, and this year we purchased the aftermarket tools specialists, SP Diagnostics.” ...

Bartec Announces its Newest TPMS Innovation

Bartec USA announces the expansion of its range of aftermarket service products. At this year’s SEMA and AAPEX shows, Bartec is announcing the Tech200Pro. The tool integrates TPMS sensor test...

Advanced TPMS Scan Tool Technology with Bartec USA Tech400Pro

The Tech400Pro from Bartec works on more cars, is even faster, and offers features and benefits to make your shop more efficient. The Tech400Pro offers wireless TPMS, wireless charging, wireless d...

Bartec Offers Pro Series of TPMS Tools

The Pro Series lineup from Bartec USA includes three TPMS tools for repair shops: the 300Pro, 300ProC and 400Pro. The 300Pro is a high-powered activation tool and sensor programming unit that does not...

Bartec Announces Latest Software Update

Bartec USA announces the release of its last tool software update. Available to current subscribers to tools.bartecusa.com, Release 53 can now be downloaded to users’ respective Bartec TPMS Tool. ...

Bartec Adds QWIK-SENSOR Coverage

Bartec USA has announced the release of the next tool software update for its range of TPMS tools. This latest release features the ability to program the newly released multi-coverage programmable...

Bartec Demonstrates Wireless Tool Updating and Printing

Bartec announces wireless updating for the Tech500 TPMS Tool. “With the Tech500 TPMS Tool up to date, you always have the very latest in TPMS vehicle and sensor coverage,” said Bartec CEO Scot Hol...

Huf TPMS 'IntelliSens' Now Supported By Bartec And ATEQ Tools

The new “IntelliSens” universal sensor by Huf is now supported by Bartec and ATEQ diagnosis tools. The latest updates run by the tool manufacturers come just in time for tire changing this spring...

TPMS Relearn Chart Available from Bartec

Bartec USA has announced the release of its 2021 TPMS Relearn Chart. The 2021 TPMS Relearn chart is the result of the collaborative efforts between the Tire Industry Association (TIA) and Bartec U...

Bartec USA Announces New TPMS Relearn Chart

The 2021 TPMS Relearn chart is the result of the collaborative efforts between the Tire Industry Association (TIA) and Bartec USA. Branded for Bartec, the 2021 edition of the relearn chart incl...

Bartec USA Announces More Software Updates

Bartec USA announces their next round of TPMS tool updates: software version 63 for the Tech400SD, Tech300Pro, Tech500 and Tech400Pro tools; software version 2.2 for the Tech450Pro and Tech600Pro; an...

Bartec USA Announces 4th Tool Update in 2020

Bartec USA announces the release of their latest TPMS tool software update. “Software update 62.3 is our fourth update for the year for our range of TPMS tools and once again adds significant co...

Bartec USA Announces 3rd Software Update in 2020

Bartec USA announces the release of their latest TPMS tool software update. According to Bartec’s CEO Scot Holloway, “Software update 62.2 is our third update for the year for our range of TPMS t...

Bob Harvey Joins Bartec USA

Bartec USA, a one-stop-shop for all things TPMS, has hired Robert “Bob” Harvey. Bob joins Kelly Nugent as one of Bartec USA’s North American Account Executives. “Most recently from Amer...

Bartec to Demonstrate RITE-SENSOR at SEMA

Bartec USA announces their participation in their 14th industry week. Bartec USA will have booths at both shows, AAPEX . Both displays will feature RITE-SENSOR, Bartec’s programmable, single...

Bartec USA Announces Partnership with TCS

Bartec USA announced their partnership with TCS, an ARI company. This is the first time Bartec is facilitating an integration from the Tech200Pro with a software provider. TCS (booth 42175) and B...

Bartec USA Announces Industry Week Training and Tool Giveaway

Bartec USA is again exhibiting at AAPEX (the company’s 10th year) and is playing a large role in teaching, training and discussing new technology at the show. As a presenter in this year’s new Mob...

Bartec USA Expands Its Loaner Tool Program to Victims of Hurricane Irma

From Bartec USA: The Bartec USA family continues to keep those affected by Hurricane Harvey in our thoughts and prayers. We also extend our thoughts and prayers to all those now affe...

Bartec USA Announces Loaner Tool Program for Customers Affected by Hurricane Harvey

From Bartec USA: The Bartec USA family wishes to extend our thoughts and prayers to all those affected by Hurricane Harvey and the subsequent devastation it caused. Bartec USA would like to hel...

Bartec TPMS Software Update Contains 7 OBD Relearns

Bartec USA announces the release of their latest TPMS tool software update. Release 56.2 contains seven OBD relearns and is now available for download for each respective Bartec TPMS tool. This...

Bartec Announces Its Latest Software Update for TPMS Tools

Bartec USA announces the release of its most recent tool software update. Available to current subscribers at tools.bartecusa.com, Release 55 can now be downloaded to a technician’s respective B...

Bartec Announces Increased Placard Coverage for Tech400Pro

Bartec USA announces the addition of 23 vehicles whereby the Tech400Pro and Tech500 can adjust the recommended inflation pressure . Seven of these additions are brand new, never offered before coverag...

Bartec Announces Latest TPMS Software Update

Bartec USA announces the release of its latest tool software update. Available to current subscribers to tools.bartecusa.com, Release 54 can now be downloaded to the respective Bartec TPMS Tool. As...

TPMS Trade Up Offered By Bartec

Bartec USA announces its TPMS Tool “Trade up” Promotion. Now through June 30, customers can receive more than $800 in add-ons when purchasing a Tech400Pro TPMS Diagnostic Tool. “As we app...

Bartec To Conduct Live Vehicle Demos At SEMA Booth

As anyone who attends SEMA knows, when you change the wheel and tire fitment on a car or truck with TPMS, careful consideration must be given to recommended inflation pressure and load capacity. Accor...

New Bartec Tech400Pro TPMS Tool To Be Demonstrated At NACE | CARS

Bartec USA, a North American leader in TPMS Diagnostic tools, will hold live demonstrations of its newly released Tech400Pro TPMS Scan Tool at this year’s NACE | CARS show in Detroit. Michael Rose, ...

Bartec Updates Tool Software

Bartec USA released its next tool software update for its range of TPMS tools. This latest tool software release integrates TIA’s TPMS Relearn Chart into Bartec’s TMPS software. “The TIA C...