Directions: Techs Offer Feedback on Proposed A/C Refrigerant Ban

Directions: Techs Offer Feedback on Proposed A/C Refrigerant Ban

The following comments regarding the proposed ban on the sale of automotive refrigerant to consumers (see page 32 of the May issue of Underhood Service) were e-mailed to me in the past few weeks.

Most of the comments were directed toward Tom Brown and the coalition opposing such legislation.

Note: Comments below may have been edited for length and content. The staff at Underhood Service would like to thank these and all who contributed their comments and their insight on this issue.

— Ed


Yes, I think it should be banned to DIYer and non-certified (so-called mechanics). I won’t call these people technicians. I also think there should be a ban on all brake components sold to these people, too. You know that the DIYer or the non-certified mechanic is just going to let refrigerant into the air if he has to change a component or an O-ring. Motor vehicles can be deadly if the wrong driver gets behind the wheel. The same thing can happen if the wrong so-called “mechanic” attempts to repair a safety item or handle hazardous materials in vehicles.
— Jim Ruggiero, owner of J&G Auto Repair Center, Jersey City, NJ


I thought I’d offer a slightly more educated perspective than that of Mr. (Tom) Brown on the proposed CARB ban of refrigerant sales to consumers.

It is unfortunate that this consumer advocate group in California does not understand the long-term impact of R-134a refrigerant. When the EPA SNAP rule was put into effect in the early 1990s, many in the automotive industry thought that our refrigerant problems were forever solved.

We now realize that we were mistaken and are working toward finding an alternative refrigerant for use in vehicles. The problem with selling refrigerant to the consumer is twofold. First, consumers are not aware of the environmental impact associated with R-134a and are therefore under the improper belief that if it is sold on the store shelves, it must be safe.

Second, consumers often purchase refrigerant to recharge their vehicles without fixing the leaks that are the primary cause of their air-conditioning system failure. This suggests to the consumer that simply topping off will fix the system.

Finally, I find it odd that service professionals in California must follow a strict service regiment including special equipment for A/C work, yet Mr. Brown certainly does not support the same requirements for consumers. The fact that R-134a has been sold without EPA 609 certification was a gross oversight on the part of the EPA from the beginning, and ignoring the problem will not make it go away.

We count on leadership from California for our national energy and environmental guidelines and I certainly hope CARB does the right thing by removing these cans from the reach of the public.
— Peter Coll, Refrigerant Analysis Division Manager, Neutronics Inc., Exton, PA


I think if DIYers wish to charge their own vehicles they should be subject to the same licensing that is required for professional shops. They should have to be licensed and certified by a generally approved source.

Furthermore, the language that “Stay Cool California” uses is, to say the least, dramatic. Having a working air conditioner isn’t necessary for survival. If someone can’t afford to repair his or her air conditioner, should the environment suffer? Wind down the window. I can’t charge my home HVAC system! I have to call a qualified HVAC residential serviceman and pay them to do it. That’s the cost of owning a house. The same goes for a vehicle owner. Don’t whine about how the proposal targets the lower class. It’s the law.

When a DIYer works on his own vehicle, so be it. As long as it doesn’t endanger me or my family, I don’t care what they do. But, when it affects my air, I have an opinion. A strong one.
— Dale A. Toalston, ASE-certified L1 automobile specialist

You May Also Like

Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Scan Tool

If there’s a truth that extends across all computerized devices, it’s that we likely utilize only a fraction of the things they have the ability to do. Mobile phones are a great example. How many people do you know who only use them for calls, voicemail and text messages? We all know they do so much more.The scan tools we use every day fall into the same category. Are you maximizing yours to their full potential? Don’t let them be just an expensive code reader. That may be easier said than done, because it takes a lot of time to understand both the scan tool and how well it interacts with the vehicles you’re working on, but there are a few factors that can help you dive a little deeper into the functions at your fingertips.

Brake Lathe Basics

Resurfacing drums and rotors is a machining process with its own specific guidelines.

Refrigerant Oil Has to Be Right

Oil type is just as important as oil capacity.

Three bottles of refrigerant oil
Top 5 Tools: Steve Coffell, Auto World, Hazelwood, MO

Steve Coffell, a technician at Auto World in Hazelwood, MO, says his Top 5 Favorite Tools are: Related Articles – Lisle Low Profile Fuel Line Disconnect – Dent Fix Soft-Shock Mallet DF-SM76 Reduces Damage – New ProMAXX Diesel Fuel Injector Seal Puller/Saver ProKits   OTC Genisys Touch – Quick scan, bidirectional control Snap-on VANTAGE Pro

Wheel Bearing Adjustment Tools & Equipment

A wheel bearing that’s out of adjustment can reduce bearing life and can affect more than just the bearing. It’s important to adjust the wheel bearing endplay to the proper specifications. If the bearing set is adjusted too loose or too tight, it can cause the bearing to fail prematurely. There are a few types of assemblies, so using correct procedures and tools will ensure a comeback-free wheel bearing installation.

Other Posts

2024 Is Your Year to Be the Technician You Always Wanted to Be

As we enter 2024, strategic career planning is essential for success in the automotive repair industry.

happy new year 2024
Impact Wrench Technology

Interchangeable anvils are a feature on some new impacts.

Tools in the Eye of the Beholder

We’re here to help you see all the tools, so you can invest wisely.

Multimeter Accuracy: How Important Is It?

Multimeter accuracy is critical for EV diagnostics.

multimeter