Tech Tip: Whine, Growl or Vibration Type Noise from Buick Engine Compartment

Tech Tip: Whine, Growl or Vibration Type Noise from Buick Engine Compartment

There may be a whine and or growl noise from the engine compartment accompanied by a vibration during various driving conditions. This may include vehicle acceleration/deceleration, steering input and cornering left. It may be mistaken as a transmission noise or power steering pump concern.

Models:
2010 Buick Allure/LaCrosse

Condition/Concern:
There may be a whine and or growl noise from the engine compartment accompanied by a vibration during various driving conditions.

Figure 1This may include vehicle acceleration/deceleration, steering input and cornering left.

It may be mistaken as a transmission noise or power steering pump concern.

Recommendation/Instructions:
There are two identified areas that technicians should inspect the power steering lines for a ground out condition. The first area to inspect is the frame/bulkhead on the passenger side rear of engine compartment.

It’s easier to raise the vehicle and look from underneath. Also inspect the aluminum power steering lines, making sure you have 1” of clearance between the lines and right frame rail.

(See Figure 1.)

If the condition is present, the lines should be loosened (banjo bolt below rear cylinder head) and repositioned away from any body parts. This procedure normally requires you to lift the vehicle to gain access to the banjo bolt. If you move the lines to gain more clearance, make sure you don’t move them too far, as you will cause a ground out of the aluminum lines to the rubber power steering reservoir lines.

Important: You will need to replace the banjo bolt washers (P/N 13305013) anytime you loosen the banjo bolt, as they are a one-time compression washer.

Courtesy of Identifix.

You May Also Like

New Snap-on Limited Edition Speed Demon Roll Cab

Features include next-level organization, durability, security, mobility and exclusive Speed Demon emblem.

The new Snap-on KETP682A3WHZ Limited-Edition Speed Demon EPIQ 68" Roll Cab adds “wow” factor in a tool storage showpiece. Next-level organization, durability, security, mobility, and the exclusive Speed Demon emblem represents everything enviable about working in the industry that keeps the world moving.

“The Speed Demon’s exclusive badging features an intricately detailed skull intertwined with pistons and an engine, symbolizing speed and the rebellious spirit that comes with being part of the automotive and heavy-duty worlds that combine high-level skills with high-level power,” says Angelo Gargano, Snap-on Product Manager. “The fusion of skull and pistons evokes a sense of raw energy and daring, while the meticulous craftsmanship of this roll cab reflects both techs’ and Snap-on’s dedication to quality and innovation.”

AMD-035 Membrane Dryer Provides Ultra-Clean & Ultra Dry Air

The dryer has a flow rating of 35 SCFM and maximum working pressures of 150 PSI.

BendPak Full-Rise Scissor Lift Delivers Two-Post Performance

SP-7XE scissor lift lays flat and raises a vehicle six feet with an open center below.

BendPak to Debut Eight-Armed Car Lift Concept at NADA

Octa-Flex improves technician productivity, convenience and ergonomics, according to BendPak.

Matco’s New Ghost Cart: Where Tools and Style Spookily Align

Haunt your shop with efficiency: Matco’s 2023 Ghost Cart is sleek and functional.

Matco Ghost Cart tool storage

Other Posts

TEXA Releases IDC5 CAR 76.5.0 Update

IDC5 CAR 76.5.0 is characterized by over 2600 new possible selections for the major makes on the market worldwide.

Cordless vs. Pneumatic: The Battle Continues

What does the future hold? Will one gain the upper hand over time?

Red and Blue toy robots boxing
TS Toolbox Guide February 2024

Here’s a look at some of the core feature and modern frills to consider when it’s time to move into a new office.

toolbox guide illustartion
Embracing Cutting-Edge Solutions the Industry has to Offer

Embracing cutting-edge solutions is strategic and imperative for technicians navigating the constantly changing landscape of automotive maintenance and repair.

Nadine Battah