Tech Tip: Toyota RAV4 Recall And Inspection Tags

Tech Tip: Toyota RAV4 Recall And Inspection Tags

If you get a 2005-2011 Toyota RAV4 in your shop for an alignment of a complaint of either rear tire wear or a knocking noise, you need to be aware of a recall and inspection campaign Toyota is performing. Toyota Safety Recall C0J involved inspecting the right and left Rear Suspension Lower Arm No. 1 for looseness. Based upon this inspection, it may have been necessary to replace the arm(s).

If you get a 2005-2011 Toyota RAV4 in your shop for an alignment of a complaint of either rear tire wear or a knocking noise, you need to be aware of a recall and inspection campaign Toyota is performing. Toyota Safety Recall C0J involved inspecting the right and left Rear Suspension Lower Arm No. 1 (“arm”) for looseness. Based upon this inspection, it may have been necessary to replace the arm(s).
 
Toyota received reports from dealers indicating that some vehicles experienced symptoms of the recalled condition after being inspected or repaired. Upon investigation, it was discovered that some inspections were not adequate and portions of the repair procedure may not have been performed correctly.
 
Based upon this information, Toyota is re-notifying all owners covered by Safety Recall C0J. The notification will apologize to customers and inform them that their vehicles may not have been inspected or repaired correctly. The letter will request the customer to return to the dealership for a revised inspection and remedy procedure.
 
If a lower arm has been inspected and has passed, it will have an epoxy tag on the arm indicating that it passed the inspection. If it does not, send the customer to the dealer for the recall to be addressed.
 
Courtesy of Toyota

You May Also Like

Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Scan Tool

If there’s a truth that extends across all computerized devices, it’s that we likely utilize only a fraction of the things they have the ability to do. Mobile phones are a great example. How many people do you know who only use them for calls, voicemail and text messages? We all know they do so much more.The scan tools we use every day fall into the same category. Are you maximizing yours to their full potential? Don’t let them be just an expensive code reader. That may be easier said than done, because it takes a lot of time to understand both the scan tool and how well it interacts with the vehicles you’re working on, but there are a few factors that can help you dive a little deeper into the functions at your fingertips.

Brake Lathe Basics

Resurfacing drums and rotors is a machining process with its own specific guidelines.

Refrigerant Oil Has to Be Right

Oil type is just as important as oil capacity.

Three bottles of refrigerant oil
Top 5 Tools: Steve Coffell, Auto World, Hazelwood, MO

Steve Coffell, a technician at Auto World in Hazelwood, MO, says his Top 5 Favorite Tools are: Related Articles – Lisle Low Profile Fuel Line Disconnect – Dent Fix Soft-Shock Mallet DF-SM76 Reduces Damage – New ProMAXX Diesel Fuel Injector Seal Puller/Saver ProKits   OTC Genisys Touch – Quick scan, bidirectional control Snap-on VANTAGE Pro

Wheel Bearing Adjustment Tools & Equipment

A wheel bearing that’s out of adjustment can reduce bearing life and can affect more than just the bearing. It’s important to adjust the wheel bearing endplay to the proper specifications. If the bearing set is adjusted too loose or too tight, it can cause the bearing to fail prematurely. There are a few types of assemblies, so using correct procedures and tools will ensure a comeback-free wheel bearing installation.

Other Posts

2024 Is Your Year to Be the Technician You Always Wanted to Be

As we enter 2024, strategic career planning is essential for success in the automotive repair industry.

happy new year 2024
Impact Wrench Technology

Interchangeable anvils are a feature on some new impacts.

Tools in the Eye of the Beholder

We’re here to help you see all the tools, so you can invest wisely.

Multimeter Accuracy: How Important Is It?

Multimeter accuracy is critical for EV diagnostics.

multimeter