Perspectives: California — Where CSI and PSI Meet

Perspectives: California — Where CSI and PSI Meet

The California Air Resources Board (CARB) has approved the “Regulation to Reduce Greenhouse Gas Emissions from Vehicles Operating with Underinflated Tires" — a move that will affect your shop service.

Do you check the tire pressure on every tire of every vehicle that comes into your shop for service, any service?

If life goes the way the state of California wants it to, repair shops in all 50 states will be doing just that — and it could be
considered a crime if they don’t.

According to our friends at ASA (Automotive Service Association), the California Air Resources Board (CARB) approved the “Regulation to Reduce Greenhouse Gas Emissions from Vehicles Operating with Underinflated Tires.”

These new rules have been put in place to reduce greenhouse gas emissions because, according to CARB, “Properly inflated tires reduce the rolling resistance of a vehicle, resulting in the vehicle’s engine having to do less work to move the vehicle at roadway speeds.

The end result is a fuel savings that staff estimates will reduce greenhouse gas emissions by an estimated 1.4 million metric tons in 2020. Since the vehicle’s engine has to do less work, Californians can also expect minor reductions in exhaust emissions for both particulate matter and oxides of nitrogen, as well as prolonged tire life, and the associated health and environmental benefits.”

So, with the approval of the Office of Administrative Law in California, as of Sept. 1, 2010, all automotive service providers in the state must meet the following requirements:

• Check and inflate each vehicle’s tires to the recommended tire pressure rating with air or nitrogen, as appropriate, at the time of performing any “paid for” automotive maintenance or repair service;

• Indicate on the vehicle service invoice that a tire inflation service was completed and the tire pressure measurements after the services were performed;

• Perform the tire pressure service using a tire pressure gauge with a total permissible error no greater than ±2 pounds per square inch (psi);

• Have access to a Tire Inflation Reference that is current within three years of publication; and

• Keep a copy of the vehicle service invoice for a minimum of three years, and make the vehicle service invoice available to the ARB or its authorized representative upon request.

If you’d like to read all the nitty-gritty details of the regulation, visit ASA’s legislative website at www.TakingTheHill.com.

There are further details about inflating with nitrogen, customers declining the service, etc.

The state estimates that the new program will cost consumers about $100 million, but will save them $500 million at the gas pump.

I think one comment on the CARB website summarizes quite well the whole situation, “I am outraged that MY government is considering criminalizing something like TIRE PRESSURE.” 

You May Also Like

Embracing Cutting-Edge Solutions the Industry has to Offer

Embracing cutting-edge solutions is strategic and imperative for technicians navigating the constantly changing landscape of automotive maintenance and repair.

Nadine Battah

Remember last month how I said 2024 was your year to be the technicians you always wanted to be? Remaining stagnant as a technician is simply not an option anymore if you want to be successful in the automotive industry. You must proactively seek out opportunities to embrace new tools, techniques and solutions that promise to enhance efficiency, accuracy and customer satisfaction.Embracing what’s new is strategic and imperative for technicians navigating the constantly changing landscape of automotive maintenance and repair.One of the top reasons I can give you for embracing new technology is the potential for improved diagnostic accuracy and efficiency. With the arrival of advanced diagnostic tools, like the Bosch ADS 625X, the Autel IA900, or the Hunter ADASLink, technicians can pinpoint issues with precision, reducing guesswork and minimizing the risk of a comeback. Whether it’s sophisticated tools or cutting-edge software solutions, the ability to leverage these new tools should empower you to deliver next-level service and drive positive repair experiences for your customers.Another thing to keep in mind is that embracing new technology and equipment opens doors to expanded service offerings. From state-of-the-art lifts and alignment systems, to specialized tools designed for specific makes and models, investing in the latest equipment enables you and other technicians to tackle a larger range of repairs and maintenance with confidence and precision. As the technology in cars continue to evolve, so too must the tools and equipment that technicians rely on to get the job done.Embracing new technology and equipment can also lead to improved productivity in the shop. By leveraging high-quality products that are specifically designed for today’s vehicles, you can streamline workflow, minimize downtime and deliver exceptional results for your customers.At TechShop, we understand the importance of embracing new technology, equipment and products in the automotive repair industry. That’s why we’re excited to announce the debut of our all-new “Tool Time” video podcast series, where guests from brands like Ingersoll Rand, Clore Automotive, SATA Spray Equipment and many more will sit down and join Eric Garbe and myself to discuss education and training on the latest products our industry has to offer.Join us as we embrace the future of automotive tool supply and equipment advancements together. And, be sure to subscribe to the TechShop newsletter to stay tuned!

Brake Lathe Basics

Resurfacing drums and rotors is a machining process with its own specific guidelines.

Refrigerant Oil Has to Be Right

Oil type is just as important as oil capacity.

Three bottles of refrigerant oil
Top 5 Tools: Steve Coffell, Auto World, Hazelwood, MO

Steve Coffell, a technician at Auto World in Hazelwood, MO, says his Top 5 Favorite Tools are: Related Articles – Lisle 61860 Oil Filter Housing Torque Adapter – Mueller Kueps Presents Redesigned Sensor Tap Series – Lisle Low Profile Fuel Line Disconnect   OTC Genisys Touch – Quick scan, bidirectional control Snap-on VANTAGE Pro –

Wheel Bearing Adjustment Tools & Equipment

A wheel bearing that’s out of adjustment can reduce bearing life and can affect more than just the bearing. It’s important to adjust the wheel bearing endplay to the proper specifications. If the bearing set is adjusted too loose or too tight, it can cause the bearing to fail prematurely. There are a few types of assemblies, so using correct procedures and tools will ensure a comeback-free wheel bearing installation.

Other Posts

Identity Crisis and the Rise of the Specialist

Is it time to move on from ‘technician’ and become ‘specialists’ in the shop?

Building a Shop Culture of Success

First, write out your plan for success. Next, be sure to train your entire team at the same time.

Build A Winning Culture By Allowing Failure

Yes, strive for victory, but great shops know that solid training moments come by learning from mistakes.

TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

Tire tread